Frequency Generator
HG G-57400 | HG G-57401
A frequency generator generates an AC current in a conductive loop for track guiding Automated Guided Vehicles (AGV).
The board hosts one generator with power amplifiers and a transformer for DC decoupling. Frequencies may be selected by using a 16 position HEX switch on the front.
The generator is set to give a constant output level. Short circuits or load impedances too low as well as loop interruptions or load impedances too high are indicated by LEDs on the front panel and by a fault signal output on the socket.
The generator provides separate connectors for connecting a short loop or a long loop. The maximum load impedance differs between short and long loop by a ratio of approximately 1:2. The loop current can be adjusted by a trimpoti on the front panel.
A frequency generator generates an AC current in a conductive loop for track guiding Automated Guided Vehicles (AGV).
The board hosts one generator with power amplifiers and a transformer for DC decoupling. Frequencies may be selected by using a 16 position HEX switch on the front.
The generator is set to give a constant output level. Short circuits or load impedances too low as well as loop interruptions or load impedances too high are indicated by LEDs on the front panel and by a fault signal output on the socket.
The generator provides separate connectors for connecting a short loop or a long loop. The maximum load impedance differs between short and long loop by a ratio of approximately 1:2. The loop current can be adjusted by a trimpoti on the front panel.
Main Features
- Single Loop Frequency Generators for the track guidance of Automated Guided Vehicles (AGV)
- Generate AC current with current up to I = 600mA
- For use with Guidance Antennas
- 16 selectable frequencies
- Quartz stabilized frequency, accuracy better than 0.02 %
- Closed Euro cassette, for 19” rack (HG G-57400) or plug-in board for Euro cassette (HG G-57401)
Variants
- HG G-57400-E (Closed Euro Cassette for 19“ rack, width 20 TE, height 3 HE)
- HG G-57401-E (Plug-in board for Euro cassette, width 14 TE, height 3 HE)
You can find an overview of the available frequency variants in the data sheet in the downloads below.
Technical data
| Dimensions | HG G-57400: Euro cassette, 20TE, 3HE HG G-57401: Plug-in board for euro cassette, 14TE, 3HE |
| Weight | HG G-57400: 1,050 kg HG G-57401: 0,650 kg |
| Temperature ranges | Operation: 0° C to +50° C / Storage: -20° to +70° C |
| Supply voltage | + 24 V ±25 % |
| Output frequency | depending on model and HEX switch position |
| Frequency accuracy | better than 0,02 %, quarz stabilized |
| Current output | – Imax = 600 mA on long loop – Imax = 600 mA on short loop |
| Load impedance | – 2 to 70 Ω on long loop – 2 to 33 Ω on short loop |
| Current consumption @ Ub = +24 V |
Standby current – Long loop: 0,28 A – Short loop: 0,19 A For 600 mA and max. load impedance – Long loop: 1,1 A – Short loop: 0,63 A |
| Connector | DIN 41612, C 64 pin, AC |
Downloads
Contact
Get in touch with us.
We look forward to your call or message.
Your contact person:
Mr. Gregor Wallbaum
Tel. +49 5136 8096 – 142
sales@goetting.de
