19″ Equipment Rack
HG G-93110ZB
for up to 3x Frequency Generator HG G-57500xx
The HG G-93110ZB equipment rack in a wall-mounted housing is used to hold one to three double frequency generators of type HG G-57500xx including a suitable power supply unit for supplying power to up to three generator assemblies. A transparent plastic cover protects the components and allows inspection of the operating LEDs, which indicate the status of the generators and loops. The connections of the generators and the mains voltage input are routed to lever terminal connectors in the terminal box, which is easily accessible from the front.
The illustration shows the pin assignment of the terminal box. The terms correspond to those used for the frequency generator HG G-57500. Further information can be found in the HG G-57500 documentation.
The power supply unit allows to switch between 230 VAC and 115 VAC. The setting must be correct, otherwise the power supply unit may be damaged. On delivery, it is set to 230 VAC. The switch is located on the power supply unit’s board behind the side opening marked with an arrow in the following illustration and can be operated with a small screwdriver. To do this, the power supply unit must be removed from the equipment rack. The switch is marked accordingly with 115 or 230.
Technical data
| Dimensions | 263 mm x 259 mm x 250 mm (L x W x H, incl. cable glands) |
| Casing | Plastic |
| Format | 19“ Rack for wall mounting / Eurocard format / front panel 8 TE |
| Weight | 3,8 kg (without frequency generators) |
| Supply voltage | 230 VAC (standard) or 115 VAC, switchable |
| Output | 24 VDC / 2,5 A |
| Current consumption | For each active frequency generator 300 mA @ 230VAC |
| Temperature ranges | 0° to +50° C | Storage: 0 to +70° C |
| Relative humidity | 95 % at 25° C (without condensation) |
| Protection class | IP 66 if the following conditions are met: – Cable suitable for the cable glands in use (see Connection below) – Seals in the unused cable glands (2x in the scope of delivery) |
| Connection | – 4x cable gland on the terminal box, cable diameter 4 – 10 mm – Terminal box with lever terminal connectors 0.2 – 4 mm² |
Downloads
Contact
Get in touch with us.
We look forward to your call or message.
Your contact person:
Mr. Gregor Wallbaum
Tel. +49 5136 8096 – 142
sales@goetting.de
