Puck Transponder Long Range
HG G-70653
The transponders are operated at 128 kHz. The transmitting antenna of the reading unit supplies the transponder with energy by us- ing an alternating field of 128 kHz. This induces a voltage within the coil of the transponder, which generates a current that is sufficient power supply for the micro chip.
Using the induced energy, the transponder transmits its code in full-duplex mode at half the frequency of the antenna. The antenna receives the code while the transponder is in its field. A normal read cycle, including all security checks, takes about 8 ms.
The system‘s operability is guaranteed through fluid, gaseous as well as solid material. However, if mounted directly on or within metal, the transponder‘s reading distance is influenced and the positioning signal may be distorted.
The transponders are operated at 128 kHz. The transmitting antenna of the reading unit supplies the transponder with energy by us- ing an alternating field of 128 kHz. This induces a voltage within the coil of the transponder, which generates a current that is sufficient power supply for the micro chip.
Using the induced energy, the transponder transmits its code in full-duplex mode at half the frequency of the antenna. The antenna receives the code while the transponder is in its field. A normal read cycle, including all security checks, takes about 8 ms.
The system‘s operability is guaranteed through fluid, gaseous as well as solid material. However, if mounted directly on or within metal, the transponder‘s reading distance is influenced and the positioning signal may be distorted.
Application Examples from the Automation Industry
Automated Guided Vehicles (AGV)
- Positioning
- Track Guidance
- Identification
Read-Write Transponder (RW)
The Read-Write transponders are equipped with an EEPROM in which the code is stored. The EEPROM may be re- written up to more than 100,000 times.
Technical data
| Dimensions | ø 74 mm x 15 mm (ø x H) |
| Mounting Hole | ø 5.2 mm |
| Material | Polycarbonate ABS casing filled with Polyurethane compound |
| Weight | 290 g |
| Protection Class | IP 67 |
| Mechanical pressure | max. 490 N/cm2 |
| Relative humidity | 100% @ 25° C (without condensation) |
| Temperature ranges | Operation: -20° C to +60° C / Storage: -20° C to +60° C |
| Reading system, read write | PSK |
| Operating frequency | 128 kHz antenna system, 64 kHz transponder |
| Code length | 20 Bit of useful data |
| Reading time | 8 ms |
| Reading distance | Distance between antenna and top of transponder 90 to 350 mm, depending on the antenna |
| Min. distance between two transponders |
1.5 times the antenna width |
Downloads
Contact
Get in touch with us.
We look forward to your call or message.
Your contact person:
Mr. Gregor Wallbaum
Tel. +49 5136 8096 – 142
sales@goetting.de
