Technical data | Downloads | Contact

Transponder Antenna
HG G-71915

1-dim. | CAN-Bus | Profinet | USB

The transponder antenna is used in identification systems with positioning. It outputs the transponder code via the data interface. If the transponder crosses the center of the antenna, this triggers a positioning pulse (PosiPulse). This enables the recognition of predefined positions.

As soon as a transponder is within the reading area the antenna wirelessly supplies it with inductive energy. The transponder uses that energy to cyclically transmit its code at half the antenna‘s operating frequency. Otherwise the transponder is passive and doesn‘t need any power supply or battery. There may always be at most one transponder within the reading area of the antenna.

The transponder code can be reprogrammed via the antenna with compatible Read/Write transponders.

Overview

Transponder antenna for the positioning of automated guided vehicles (AGV)
Output of transponder code (via the bus) and PosiPulse (bus and digital)
Operating frequency 128 kHz
Protection class IP 65
Reading distance 5-80 mm, depending on the transponder type, see technical data
max. crossing speed 2.0 m/s
Voltage supply 18 – 30 VDC
3x M12 connectors
Data interface: CAN Basic / CAN Extended / CANopen® or Profinet®
Service interface: USB for configuration
Display of operation state via LEDs, that illuminate the roadway
Transponder programming

Transponder antenna for the positioning of automated guided vehicles (AGV)
Output of transponder code (via the bus) and PosiPulse (bus and digital)
Operating frequency 128 kHz
Protection class IP 65
Reading distance 5-80 mm, depending on the transponder type, see technical data
max. crossing speed 2.0 m/s
Voltage supply 18 – 30 VDC
3x M12 connectors
Data interface: CAN Basic / CAN Extended / CANopen® or Profinet®
Service interface: USB for configuration
Display of operation state via LEDs, that illuminate the roadway
Transponder programming

Variants/Versions

HG G-71915ZA: CAN-Bus / CANopen® interface
HG G-71915YA: Profinet® interface

Technical data

Dimensions	160 mm x 80 mm (plus connectors) x 55 mm (W x D x H)
Casing	Polycarbonate
Weight	450 g
Protection class	IP 65
Reading distance	• 5 – 60 mm with Transponder types HG G-71325XA, HW DEV00095/98, HW DEV00090/99, HW DEV00130ZA/VA, HW DEV00131ZA/VA • 5 – 80 mm with Transponder types HG G-70633ZB, HW DEV00162, HG G-70650VA, HG G-70652ZC, HG G-70654ZB • 15 – 80 mm with Transponder type HG G-70653ZA
Relative humidity	95 % @ 25° C (without condensation)
Temperature ranges	Operation: -25° C to +50° C / Storage: -40° C to +85° C
Voltage supply +UB	+18 VDC to +30 VDC, nominal voltage +24 VDC
Current consumption	130 mA @ 24 VDC
Operating frequency	128 kHz
Code length	20 Bit (Trovan™)
max. Crossing speed	2,0 m/s
Repeat accuracy	±2 mm to 0,5 m/s with noisefree environment
Output	• Via bus telegrams: Transponder code and PosiPulse Profinet® or CAN, depending on the antenna variant • Digital output: PosiPulse +UB / 20 mA current source, configurable duration
C onnectors	3x M12 circular connectors, cables for several interfaces available as Götting accessories
Configuration	Via USB service interface in connector X1, USB Virtual COM Port