1.5-dimensional Positioning and Ident Antenna Outdoor
HG G-98810

Note: This antenna in an earlier version used to be the main part of the system HG S 71720. The system number is now deprecated, please use the information on this page instead.

The antenna is designed to be used for positioning and/or trackguiding vehicles. All important parameter settings, calibration and updates are carried out via an integrated serial interface or CANopen®.

Antenna HG G-98810-C utilizes an antenna concept, which has a larger reading area with a linear transponder positioning function. The antenna is so-called 1.5 dimensional, meaning that it outputs the Transponder code as well as the linear deviation rectangular to the direction of travel as well as the information „Before transponder“, „Crossing of the transponder“ and „Behind transponder“.

Götting transponder systems have a consistent output format, which enables the user to configure additional system information. This additional information, for example, may be used by an external visualization system (e.g. vehicle control unit with display) and enables statements regarding the condition and availability of antennas and transponders.

Note: This antenna in an earlier version used to be the main part of the system HG S 71720. The system number is now deprecated, please use the information on this page instead.

The antenna is designed to be used for positioning and/or trackguiding vehicles. All important parameter settings, calibration and updates are carried out via an integrated serial interface or CANopen®.

Antenna HG G-98810-C utilizes an antenna concept, which has a larger reading area with a linear transponder positioning function. The antenna is so-called 1.5 dimensional, meaning that it outputs the Transponder code as well as the linear deviation rectangular to the direction of travel as well as the information „Before transponder“, „Crossing of the transponder“ and „Behind transponder“.

Götting transponder systems have a consistent output format, which enables the user to configure additional system information. This additional information, for example, may be used by an external visualization system (e.g. vehicle control unit with display) and enables statements regarding the condition and availability of antennas and transponders.

Variants

The antenna is available in two variants that have different serial interfaces, both have CAN:

  • HG G-98810ZC: RS 442 / CAN
  • HG G-98810YC: RS 232 / CAN

Technical data

Weight approx. 10 kg
effective antenna area 500 x 175 mm (function range positioning)
Power supply antenna 24 V -20% +50%, max. 1,1 A @ 24 V
Operating temperature -20 to +50° C, heating period 5 min
Mech. stress load 5 g 11 ms / 2 g 10 to 55 Hz
Protection class IP 65
Operational safety According to the German norm BGV B11 Area 1
Metal and interference free
area
See device description (PDF) below
Transmission / reception frequencies – The antenna sends its energy field at 128 kHz
– The transponders answer at half the antenna‘s frequency, 64 kHz
Max. pass-over speed 3 m/s
Reading distance
(distance transponder –
underside reading antenna)
– 30 to 90 mm (with HW DEV00095/HW DEV00098)
– 50 to 150 mmm (with HG G-71325XA)
Nominal reading distance – 60 mm (with HW DEV00095/HW DEV00098)
– 100 mm (with HG G-71325XA)
Width of the active Antenna reading area ±250 mm
Static positioning accuracy ±5 mm @ nominal reading height; see device description (PDF) below
Connection 3 M12 connectors
Signal processing time 8 ms
Output RS 232 / RS 422 The connection speed is 19200 or 38400 Bd.
The telegram content may be configured.
3964R or “transparent“ protocol selectable
Output positioning pulse 20 mA current source, isolated
CAN interface Isolated
Terminating resistor (Terminator) not integrated
Full CAN
Basic CAN According to ISO/DIS 11898 Identifier, Data rate, Basic/Extended CAN; configurable via serial interface
CANopen® CANopen, Device Profil DS 401
Node ID and transmission rate configurable via serial interface or SDOs

Contact

Get in touch with us.
We look forward to your call or message.

Your contact person:
Mr. Gregor Wallbaum

Tel. +49 5136 8096 – 142
sales@goetting.de