Transponder
HW DEV00095 / 98
The transponders are operated at 128/64 kHz.
The transmitting antenna of the reading unit supplies the transponder with energy by using an alternating field of 128 kHz. This induces a voltage within the coil of the transponder, which generates a current that is sufficient power supply for the micro chip.
The system´s operability is guaranteed through fluid, gaseous as well as solid material.
However, if mounted directly on or within metal, the transponders´s reading distance is influenced and the positioning signal may be distorted.
The transmitting antenna of the reading unit supplies the transponder with energy by using an alternating field of 128 kHz. This induces a voltage within the coil of the transponder, which generates a current that is sufficient power supply for the micro chip.
The system´s operability is guaranteed through fluid, gaseous as well as solid material.
However, if mounted directly on or within metal, the transponders´s reading distance is influenced and the positioning signal may be distorted.
Read-Write-Transonder (RW)
The Read-Write transponders are equipped with an EEPROM in which the code is stored. The EEPROM may be rewritten up to more than 100,000 times.
HW DEV00098
Transponder variant pre-programmed with user-defined codes.
Application Examples from the Automation Industry
Automated Guided Vehicles (AGV)
- Positioning
- Track Guidance
- Identification
Technical Data
| Outer diameter | ø 30 mm |
| Mounting hole | 5 mm |
| Thickness | 2 mm |
| Weight | 2,7 g |
| Material | Epoxy |
| Reading time | 8 ms |
| Operating temperature | -25 to +60° C |
| Storage temperature | -40° to +75° C |
| Protection class | IP 67 |
| Reading system, read write | PSK |
| Operating frequency | 128 kHz / 64 kHz |
| Useful data | 20 Bit |
| Min. distance between two transponders | 1,5-times the antenna width |
| Programming device | HG 81830YA |
| Reading distance | approx. 50 mm, please refer to the data sheets of the individual antennas |
Downloads
Contact
Get in touch with us.
We look forward to your call or message.
Your contact person:
Mr. Gregor Wallbaum
Tel. +49 5136 8096 – 142
sales@goetting.de
