Transponder Variants
HW DEV00131
The transponders operate at 125 kHz or 128/64 kHz.
The transmitting antenna of the reading unit supplies the transponder with energy by using an alternating field of 125 kHz. This induces a voltage within the coil of the transponder, which generates a current that is sufficient power supply for the micro chip.
The system‘s operability is guaranteed through fluid, gaseous as well as solid material.
However, if mounted directly on or within metal, the transponder‘s reading distance is influenced and the positioning signal may be distorted.
The transmitting antenna of the reading unit supplies the transponder with energy by using an alternating field of 125 kHz. This induces a voltage within the coil of the transponder, which generates a current that is sufficient power supply for the micro chip.
The system‘s operability is guaranteed through fluid, gaseous as well as solid material.
However, if mounted directly on or within metal, the transponder‘s reading distance is influenced and the positioning signal may be distorted.
Read-Write-Transponder (RW)
The Read-Write transponders are equipped with an EEPROM in which the code is stored. The EEPROM may be rewritten up to more than 100,000 times.
Application Examples from the Automation Industry
Automated Guided Vehicles (AGV)
- Positioning
- Track Guidance
- Identification
Variants
125 kHz:
- HW DEV00131YA
- HW DEV00131WA
Transponder variant pre-programmed with user-defined codes
128/64 kHz:
- HW DEV00131ZA
- HW DEV00131VA
Transponder variant pre-programmed with user-defined codes
Technical Data
| Outer diameter | ø 30 mm |
| Thickness | approx. 3 mm |
| Weight | approx. 3 g |
| Material, color | Epoxy, blue |
| Reading time | 12 ms (8 ms for variants ZA / VA) |
| Operating temperature | -25 to +60° C |
| Storage temperature | -40° to +75° C |
| Protection class | IP 67 |
| Reading system, read write | ASK (PSK for variants ZA / VA) |
| Operating frequency | 125 kHz (128/64 kHz for variants ZA / VA) |
| Useful data | 16 Bit (20 Bit for variants ZA / VA) |
| Min. distance between two transponders | 500 mm (1,5 times the antenna width for ZA / VA variants) |
| Reading distance | approx. 50 mm (approx. 30 mm for ZA / VA variants) (See the antenna’s technical specifications) |
| Programming device | HG G-81830XA (HG G-81830YA for ZA / VA variants) |
| Bottom self-adhesive | Typ 3M 9080A Double Coated Tissue Tape with protective film |
Downloads
Contact
Get in touch with us.
We look forward to your call or message.
Your contact person:
Mr. Gregor Wallbaum
Tel. +49 5136 8096 – 142
sales@goetting.de
